Fast Ethernet network protector Network camera dedicated Network professional surge protector
Model: Trss-rj11 / 45
colour:white
Authentication:CE ECM
Product introduction
TRSS-RJ45/8 type network lightning arrester is used on the RJ45 interface of the LPZ2- LPZ3 partition interface to protect Ethernet computers, servers, switches, routers and other network devices. The network surge protector is suitable for lightning strikes or other surge protection of network devices such as SWITCH, HUB, ROUTER and computers of six types of wiring systems. It has the characteristics of large flow capacity, low residual pressure level, sensitive reaction, stable performance and reliable operation.
Working principle of product
The network arrester can effectively protect the power equipment. Once the abnormal voltage appears, the lightning arrester will play a protective role. When the protected device is running under normal working voltage, the arrester will not work, and it will be regarded as a circuit for the ground. Once the high voltage is present and the insulation of the protected equipment is endangered, the lightning arrester acts immediately and leads the high voltage impact current to the earth, thus limiting the amplitude of the voltage and protecting the insulation of the electrical equipment. When the overvoltage is gone, the arrester is restored to its original state quickly, so that the system can supply electricity normally. The main function of the lightning arrester is to reduce the voltage value of the protected equipment through the action of parallel discharge gap or nonlinear resistance, and to reduce the voltage value of the protected equipment, so as to protect the power equipment.
Product features
1. The core components are strictly screened, the performance is stable, and the work is reliable.
2. The extremely low online resistance reduces unnecessary attenuation of signal intensity and increases the distance of signal transmission to the maximum.
3. Advanced production technology and beautiful appearance
4. Product multi interface is easy to use, and it doesn't need to worry about the number of interfaces.
5. The upgraded triode is equivalent to 2 diodes
Product specification
| Model and specofocation |
|
TRSS-RJ45/4 |
TRSS-RJ45/8 |
| Rated Operating Voltage |
Un |
5V/12V |
| Max continuous operating voltage |
Uc |
6V/15V |
| Voltage protective level |
Up(V)〈 |
40/60 |
| Max discharge current |
Imax(8/20μS) |
5kA |
| Nominal discharge current |
In(8/20μS) |
3kA |
| Response time |
ns |
≤1 |
| Adaptive date transfer rate |
|
100Mbps |
| Insertion loss |
|
≤0.3dB |
| Configuration dimension |
|
104×25×25 |
| Protective circuit |
|
1.2.3.6 |
1.2.3.4.5.6.7.8 |
| Operating condition |
|
Temp:-40℃~+70℃ |
| |
RH≤95%(25℃) |
| |
Sea level elevation≤3km |
| Remarks |
|
Other max continuous operating voltage can be customized |
Use of attention
1. Connect the grounding wire of the lightning protector to the ground wire of the lightning protection system.
2. The lightning arrester of the network switch is a series connection mode.
3. Please choose the network switch lightning protector that is the same as the protected device's interface type.
4. The lightning protector of the network switch should match the working voltage of the protected device. When installing, please connect according to the installation sketch map.
Company profile
Thor has been designing new products to meet the RoHS directive since 2006. Thor’s ongoing commitment to RoHS compliance includes continuing efforts to reduce the presence of hazardous substances in the design and manufacture of a growing number of popular products.
We are committed to meet the requirements of the EU waste electrical and Electronic Equipment Directive. This Directive requires manufacturers of electrical and electronic equipment to put their products back into the EU market after 2005, and then use them or recycle them.
Product Tags:
|
|
Fast Network Ethernet Surge Protection Devices Lightning Protection Multi Interface Images
|
